Silvercrest SWED 100 B1 User Manual And Service Information Silvercrest ((INSTALL))

How to Use and Maintain Your Silvercrest SWED 100 B1 Electric Window Cleaner

The Silvercrest SWED 100 B1 is a handy device that helps you clean your windows without streaks or drips. It consists of a spray bottle with a microfibre cloth, a suction nozzle with a rubber lip, and a rechargeable battery. Here are some tips on how to use and maintain your device:

Before using the device for the first time, charge the battery for at least 3 hours. The charging indicator will light up red when charging and green when fully charged.

Fill the spray bottle with water or a mild window cleaning solution. Do not use any abrasive or corrosive liquids.

Spray the window with the spray bottle and wipe it with the microfibre cloth.

Switch on the device by pressing the on/off button. The power indicator will light up blue.

Place the suction nozzle on the wet window and move it slowly from top to bottom or from left to right. The device will suck up the dirty water and store it in the water tank.

Empty the water tank regularly by opening the cap and pouring out the water. Do not fill the tank more than 80%.

After using the device, switch it off and clean the suction nozzle and the rubber lip with a damp cloth. Do not use any sharp objects or solvents.

Store the device in a dry place away from direct sunlight and heat sources. Do not leave the device plugged in when not in use.

For more information, please refer to the user manual and service information[^1^]. If you have any questions or problems, please contact Silvercrest customer service.

Advantages of Using the Silvercrest SWED 100 B1 Electric Window Cleaner

The Silvercrest SWED 100 B1 electric window cleaner offers many benefits for your home or office. Here are some of them:

It saves you time and effort by cleaning your windows quickly and easily.

It prevents streaks and drips by sucking up the dirty water.

It works on any smooth surface, such as glass, mirrors, tiles, or shower screens.

It has a long battery life and can clean up to 75 m2 of windows per charge.

It has a ergonomic design and a lightweight body for comfortable handling.

It has a low noise level and does not disturb your neighbours or colleagues.

Troubleshooting Tips for the Silvercrest SWED 100 B1 Electric Window Cleaner

If you encounter any problems with your Silvercrest SWED 100 B1 electric window cleaner, here are some possible solutions:

ProblemSolution

The device does not switch on or off.Check the battery level and charge the device if necessary. Make sure the on/off button is not stuck or damaged.

The device does not suck up the water.Check the water tank and empty it if it is full. Make sure the suction nozzle and the rubber lip are clean and properly attached. Make sure the device is held at a right angle to the window.

The device leaves streaks or drips on the window.Check the microfibre cloth and replace it if it is dirty or worn out. Use less water or cleaning solution when spraying the window. Move the device slowly and evenly over the window.

The device makes unusual noises or vibrations.Check the suction nozzle and the rubber lip and remove any dirt or debris that may be blocking them. Make sure the device is not damaged or cracked. Contact Silvercrest customer service if the problem persists. aa16f39245